Swing Gates

Product Description

Swing Gates
   
Gate Mounted Swing Gate Opener

Generally a more economical gate automation system than the underground system. Electro-Hydraulic or mechanical pistons are mounted on the back of each gate Ieaf. This form of automation is particularly popular on wooden five bar farm type gates, although it is equally suited to most timber & wrought iron gate designs. It should be noted that on certain installations, it may be necessary to remove a small section of the gate post to allow the motor to be mounted correctly. Various models are available to suit gate leaves up to four metres wide.

Introduced as an economical and adaptable solution to the automation of gates. Designed to overcome most installation problems which previously prevented automation of gates, particularly those with large gate posts. Electro-mechanical motors fitted with an articulated arm allow flexible positioning of the motor unit away from the gate hinges. Opens gates up to 125⁰C and subject to a maximum of 200kg per gate leaf at 2500mm wide and 250kg per gate leaf at 2000mm wide.     

Underground Swing Gate Operators
Designed to be concealed underground below the gate hinge, and as such, virtually invisible. Popular on decorative wrought iron gates. Unlike other underground motors on the market, the hydraulic operator has a built in hydraulic pump eliminating the need for unsightly pump units mounted above ground. Hydraulic drives have fewer moving parts than mechanical equivalents giving extended life. The mechanical arm opener is a new lower priced addition to the range. Various models are available o suit gate leaves of up to four metres wide opening up to 180 degrees. Maximum leaf weight 800 kgs.